DJ AUDIO
DJ Amplifiers
DJ Beatmachines
DJ Cables & Wiring
DJ Cartridges
DJ Cases & Racks
DJ CD Players
DJ CD Recorders
DJ Compressors
DJ Crossovers
Digital DJ Gear
DJ Tools
DJ Equalizers
DJ Electronic Drum Kits
DJ Headphones
DJ Karaoke
DJ Keyboards
DJ Microphones
DJ MIDI Controllers
DJ Mixers
DJ Needles
DJ Packages
Power Conditioners
DJ Samplers
DJ Slipmats
DJ Software
DJ Software Controllers
DJ Sonic Maximizers
DJ Sound Cards
DJ Sound Effects
DJ Speakers
DJ Turntables
DJ Video Gear
DJ Voltage Converters

E-MAIL US

123DJ.COM
Chicago DJ Equipment Online Superstore - SPEAKER SYSTEMS FOR DJ, STAGE AND STUDIO USE AT THE LOWEST PRICES!
SRM350 V2 Pack
SRM350V2 Pack

Inform me when this is back in stock
Email:  
  • Two Mackie SRM350 V2 Speakers
    • 2-way bi-amplified, optimized Active loudspeaker system
    • High-output, titanium dome compression driver
    • 10-inch Neodymium long-throw low frequency transducer
    • 165-Watt class-D, Fast Recovery Low Frequency amp; 30-Watt High Frequency amp
    • Ultra-wide, smooth dispersion via HF waveguide
    • Built-in phase accurate 24dB Linkwitz-Riley electronic crossover
    • Electronic time correction, phase alignment and EQ for studio quality sound
    • Mic/line input and pass-thru connector
    • Lightweight for ultimate portability (26 lbs)
    • Flyable, Pole mountable, Floor wedge-able
      Specifications
    • Frequency Response (–3 dB): 83 Hz - 18.5 kHz
    • Frequency Range (–10 dB): 61 Hz - 22 kHz
    • Maximum SPL Long-Term @ 1m: 118 dB
    • Maximum SPL Peak @ 1m: 121 dB
    • Crossover: Linkwitz-Riley 24 dB/octave @ 2400 Hz
      Audio
    • Input Type: Balanced Differential
    • Input Impedance: 94k ohms
    • Sensitivity (center detent):
      - Line: +4 dBu
      - Mic: –36 dBu
    • Maximum Input Level: +22 dBu
    • Acoustic Contour Equalization (peaking):
      - +3 dB @ 100 Hz
      - +3 dB @ 12 kHz
    • Operating Temperature Range: –10ºC - 45ºC (14ºF - 113ºF)
      Power Amplifiers
    • Low-Frequency Power Amplifier:
      - Rated Power 165 watts continuous*
      - Rated THD < 0.03%
      - Cooling Convection Extrusion
      - Design Class D
    • High-Frequency Power Amplifier:
      - Rated Power 30 watts continuous*
      - Rated THD < 0.03%
      - Cooling Convection Extrusion
      - Design Class AB
    • Rated power is continuous rms wattage into transducer’s rated impedance @ 1 kHz for the HF amplifier and @ 100 Hz for the LF amplifier.
      Transducer Specifications
    • Low-Frequency Transducer:
      - Diameter: 10 inches (250 mm)
      - Voice Coil Diameter: 2.0 in (51 mm)
      - Sensitivity (1W@1m): 96 dB
      - Power Handling: 250 Watts RMS, long-term
      - Frequency Range: 61 Hz - 3 kHz
      - Magnet Type: Neodymium
    • High-Frequency Transducer:
      - Diaphragm Diameter: 1.4 in/36 mm
      - Horn Exit Diameter: 1 in/25.4 mm
      - Diaphragm Material: Titanium
      - Sensitivity (1W@1m): 104 dB
      - Nominal Impedance: 16 ohms
      - Power Handling: 75 Watts RMS, long-term
      - Frequency Range: 1 kHz - 20 kHz
      - Magnet Type: Ceramic
    • Horn Design:
      - Horizontal Coverage: 90º (1 kHz - 20 kHz)
      - Vertical Coverage: 80º (1 kHz - 20 kHz)
      - Mouth Size: 11.1 in x 6.1 in (283 mm x 154 mm)
      Enclosure Construction Features
    • Basic Design: Asymmetrical Trapezoidal
    • Material: Polypropylene
    • Finish: Midnight blue textured finish
    • Handles: One on side, one on top
    • Grille: Perforated metal with weather-resistant coating
      Line Input Power
    • Power Consumption: 120 watts with musical program and LIMIT LED blinking
    • US: 120 VAC, 60 Hz
    • Recommended Amperage Service: 2.5 amps
    • Note: The SRM350v2 does not support multiple voltage configurations.
      Control System Functions
    • Electronic Crossover
    • Phase Alignment
    • Equalization
    • Parametric Equalization
      Safety Features
    • Protection: Low-frequency Dynamic Bass Protection, Power Supply, and Amplifier Thermal Protection
    • Display LEDs: Signal, Power, Limit
      Physical Properties
    • Height 20.75 in (527 mm)
    • Width: 13.10 in (333 mm)
    • Depth: 12.25 in (311 mm)
    • Weight: 26 lbs. (11.8 kg)
      Mounting Methods
    • Optional hanging brackets for top and bottom of enclosure (SRM350 Bracket Kit: Part No. 0016404).
    • Never attempt to suspend the cabinet by its handles.
    • The SRM350 v2 is pole-mountable via the built-in socket on the bottom of the cabinet. Be sure the pole is capable of supporting the weight of the SRM350 v2.
  • Two Speaker Stands
  • FREE Speaker Cables!

 

Back to PA System Packages

 

2201 S. Union • Chicago, IL 60616
Phone: 312_-846-6192 • Fax: 312-492-8949

Toll Free 1-800_-856-8397
Send me manufacturer coupons
and free promotions

Email:  

CONTACT US - BEAT A PRICE - GEAR RENTAL - TRACK YOUR PACKAGE - RETURNS / WARRANTY INFO
ABOUT US - SHIPPING INFO - PURCHASE ORDERS - CUSTOM INSTALLATION - TERMS
Facebook  Youtube  TWitter

If you don't see it, it doesn't mean we don't have it. If you are interested in a certain product, but don't see it on our website, please call us or e-mail us!
*All products subject to available stock.
Copyright © 2014 by www.123DJ.com
DJ LIGHTING
DJ Beacons
DJ Black Lights
DJ Bubble Machines
DJ Centerpiece
Effects
Clamps
DJ Flame Lights
DJ Fog Machines
DJ Fog Juice
DJ Follow Spots
DJ Gobo Projectors
DJ Helicopters
DJ Intelligent Lighting
DJ Light Bags
DJ LED Lights
DJ Lasers
DJ Lighting Controllers
DJ Light Packages
DJ Mirror Balls
DJ Par Cans
DJ Party Accessories
DJ Pinspots
DJ Rope Lights
DJ Spare Bulbs
DJ Stands & Trussing
DJ Strobe Lights