Denon's DN-X500 is a 4U rackmountable mobile/club DJ analog matrix mixer with rock-solid construction and superb audio fidelity. The DN-X500's 8 line and 2 phono inputs are assignable to any of 4 channels. This 8-channel input matrix routing gives you the freedom to move any source to any channel or even the same source to multiple channels for remixing. The DN-X500 features 4 smooth 60mm VCA channel faders for level control and a responsive 45mm VCA crossfader with contour adjustment. Independent pre-fader level meters allow you to optimize and match levels for each source so you can be sure the transition crossfading between sources is smooth.

The DN-X500 also features 3-band EQ with full output kill booth output with channel select 2 mic inputs with talkover sensitivity and effects send/return with cue dry/wet knob and channel select. Plus with the optional ACD-46 rotary fader kit you can easily swap out any channel fader (1-4).

Denon DN-X500 Pro DJ Mixer Specifications:

• PDF Manual
• Video Clips
• Dimensions: 19"W x 4-2/5"H x 6-9/10"D (482 x 112.5 x 177mm)
• Weight: 5.8kg 13 lbs.
• Power supply: AC120 V ±10% 60 Hz
• Power consumption: 27W
  
  Audio Section
  
  Input Level and Impedance:
• 8-Line-14dBV (200 mV) 50kOhms
• 2-Phono -50dBV (3.0mV) 50kOhms
• Effect (Return) -14dBV (200mV) 50kOhm
• Main Mic -54dBV (2.0mV) 10kOhms
• Aux Mic -60dBV (1.0mV) 10kOhms
  
  Output Level and Impedance:
• Balanced 4dBm (1.23V) 600 ohms
• Unbalanced 0dBV (1.0V) 1k ohm
• Booth (Balanced) 4dBm (1.23V) 600-ohm load
• Rec (RCA) -10dBV (316mV) 1k Ohm
• Effect (Send) -14dBV (200mV) 1k Ohm
• Subwoofer/Lighting 2dBm (975mV) 600 ohms
• Headphone 0dBV (1.0V) 32 ohms
  
  Frequency Response:
• Line 20 to 20kHz ±2dB
• Phono 20 to 20kHz RIAA ±2dB
• Mic 20 to 20kHz ±2dB
  
  Signal to Noise Ratio:
• Line 82dB (0dBm 1kHz EQ flat)
• Phono 75dB (0dBm 1kHz EQ flat)
• Main Mic 65dB (0dBm 1kHz EQ flat)
  
  Total Harmonic Distortion Rate
• Line Below 0.05%
• Phono Below 0.05%
• Crosstalk Over 70dB
  
  Channel Equalizer
• Hi +10dB -35dB (16kHz)
• Mid +10dB -35dB (1kHz)
• Low +6dB -35dB (60Hz)
  
  Microphone Equalizer
• Hi +12dB -12dB (10kHz)
• Mid +12dB -12dB (1kHz)
• Low +12dB -12dB (100Hz)

Denon DN-X500 Pro DJ Mixer Features:

• Matrix input assignment: 8 input sources are freely assignable to any channel or even multiple channels
• 8 line/2 phono switchable
• 4 smooth 60mm VCA channel faders
• Responsive 45mm VCA crossfader with contour adjust
• Independent channel PFL meters: all input levels can be pre-adjusted in advance to match the gain levels insuring a smooth transition between fades
• Independent 3-band EQ kill (High-Mid-Low)
• Independent EQ on/off switch
• Booth output assign selector: pre-monitor any channel including Master through the booth
• output as you would with your headphones with volume control
• External send/return control: multichannel assignable effect on/off effect cueing (pre & post) effect dry/wet knob
• Independent channel A-B post switch (crossfader)
• Powerful clean headphone output
• Fader start (5V pulse): crossfader and channel fader-start trigger is compatible with
• all Denon DJ CD/MP3 players
• Compact 4U rackspace with recessed rear terminals
• Independent 3-band main and aux mic EQ
• Independent CUE system (all channels)
• Mic talkover function with sensitivity adjustment
• Split/cue headphone monitor with PFL metering
• Master output -10dB attenuation switch
• Master output stereo/mono switch
• Record out - RCA/unbalanced
• Subwoofer/lighting output with freq. adjust: ideal for powered speakers powered amp or even a signal feed for lighting systems

Heavy Duty Voltage Converters