Get the Power You Need from This Lightweight But Mighty Amp!
The Crown XTi 6000 power amplifier gives your PA system the power it needs, while remaining lightweight enough to easily hit the road. The XTi 6000 gives you the safeguards you need for hassle-free operation, providing advanced protection circuitry, level displays, versatile I/O, and presets for crossover frequencies, limiting, delay, EQ, and more. At 24 lbs., this amp is made to go where your system goes, and its rackmountable design makes it easy to take with you. It's built-in fan keeps the amp cool while you enjoy the clean, uncolored sound reproduction the XTi 6000 puts through your speakers. 

Crown XTi 6000 Power Amplifier at a Glance:

• Built to provide plenty of power for portable applications
• All the features you need for effective amp management
• Power for your system, peace of mind for you

• 2 ohm Stereo (per channel): 3,000W
• 4 ohm Stereo (per channel): 2,100W
• 8 ohm Stereo (per channel) 1,200W
• 4 ohm Bridge-Mono 6,000W
• 8 ohm Bridge-Mono 4,200W
• Integrated speaker presets with LCD front panel display
• Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
• Advanced protection circuitry
• Extremely versatile, handling a wide range of speaker impedances and outputs
• Switch-mode universal power supply
• Speaker presets for crossover frequencies, EQ, limiting, and delay
• Speakon and binding post outputs, XLR inputs and loop-thrus
• Comprehensive LED status per channel
• Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
• Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V
• Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz): +0/-1 dB
• Signal to Noise Ratio (below rated 1kHz power at 8 ohms), A-weighted: 103dB
• Damping Factor (8 ohm): 20 Hz to 400 Hz: > 500
• Input stage: Input is electronically balanced and employs precision 1 percent resistors.
• AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 15.3A; at idle draws no more than 180 watts
• Crosstalk (below rated power) 20Hz to 1kHz: > 70 dB
• Input impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced
• Load impedance (note: safe with all types of loads): Stereo - 2-8 ohms; Bridge mono - 4-16 ohms
• Voltage Gain (at 1 kHz, 8 ohm rated output): 37.1 dB
• Maximum Input Signal: +22 dBu typical
• Operating Temperature: 0 degrees C to 40 degrees C at 95 percent relative humidity (non-condensing)
• AC Line Voltage and Frequency Configurations Available (+/- 10%): 100V, 120V, 220-240V 50/60 Hz
• Ventilation       : Flow-through ventilation from front to back
• Cooling: Heat sinks and proportional-speed fan
• Dimensions: Width, Height, Depth (behind mounting surface)
• EIA Standard 19" W x 3.5 in" H x 16.2 in D
• Net Weight: 24 lbs.
• Shipping Weight: 30 lbs.