|
|
| 52 Power Pack |
 |
Regular Price $6999.99
Sale Price $3714.99
|
- Two B-52 MX1515 speakers
- The B-52 MX-1515 combines substantial SPL handling and accuracy from a very compact two-way cabinet. The 1" exit titanium compression driver delivers smooth and detailed highs while the dual B-52 15-85 woofers produce tight, punchy low end. The MX-1515 audio speaker can be used as a stand-alone system or in combination with the MX-18S subwoofer.
The B-52 MX-Series is designed for live sound, small venue installations and mobile DJ/KJs. B-52 components include high-performance loudspeakers and 1" exit titanium diaphragm compression drivers. Each rugged cabinet features metal bar handles, 16-gauge perforated steel grille, rubber feet and protective metal corners. Input connectors include 2 - 1/4" metal phone jacks and a genuine Neutrik NL4 connector. Each speaker enclosure is finished with impact-resistant black carpet.
- Nominal Impedance: 4 Ohms
- Frequency Response: 40-19kHz
- High-Freq. Dispersion: 90 x 40
- X-Over Points: 1.6kHz
- Power Handling: 600 watts
- SPL @ 1w1m: 99 dB
- Peak SPL: 130 dB
- Dimensions (W"x H" x D"): 19 x 45 x 18
- Weight (lbs): 98 lbs
- Two B-52 LX-18A Powered Subwoofers
Amplifier Specifications
- 1200 watt RMS Digital Amplification.
- 800 watts RMS @ 8 Ohms.
- 1200 watts RMS @ 4 Ohms.
- Frequency Range: 30-120Hz (+/- 3db).
- Crossover Frequency: 120 Hz.
- Crossover Slope: 4th Order (24db/octave) - LP & HP
- Subsonic Filter: 6th Order (36 db/octave).
- THD: 0.075% @ Rated Power Over Full Bandwidth.
- Nominal Impedance: 8 Ohms
- Sensitivity: 102 dB
- Peak SPL: 132 dB
- Power Consumption @ Idle: Less than 20 watts.
- Power Requirements: 120v<>60Hz<>12a
Amplifier Features
- XLR Balanced Inputs.
- XLR Balanced Full-Range Outputs
- XLR Balanced (120 Hz) High-Pass Outputs.
- 0–180 Degree Phase Switch.
- Neutrik Speaker Output.
- Full Thermal & Short Circuit Protection.
- Signal Sensing On/Off Circuitry..
Cabinet Features
- 13-ply, Baltic Birch Construction.
- Rugged black carpet finish
- 4” Heavy-Duty Casters.
- Aluminum front panel heat sink.
- Reinforced internal bracings
- Dimensions (W) x (H) x (D): 24” x 36” x 36”
- QSC RMX-2450 Amplifier
| Stereo Mode (EIA: both channels driven) |
|
| 8 ohms EIA 1 kHz 0.1% THD |
500W |
| 4 ohms EIA 1 kHz 0.1% THD |
750W |
| 2 ohms EIA 1 kHz 1% THD |
1200W |
| Bridge Mono Mode |
|
| 8 ohms EIA 1 kHz 0.1% THD |
1500W |
| 4 ohms EIA 1 kHz 1% THD |
2400W |
| Signal to Noise (20 Hz-20 kHz) |
100 dB |
| Distortion (SMPTE-IM) |
Less than 0.02% |
| Input Sensitivity @ 8 ohms |
1.23v (+4.0 dBu) |
| Voltage Gain |
50x (34 dB) |
| Output Circuitry |
Class H |
Current Consumption (1/8 power pink noise at 4 ohms @ 120VAC,
both channels driven; multiply current by .5 for 230V units.) |
10A |
- ALL CABLES INCLUDED
|
| iPod Cable - Connect your iPod to this package |
   |
| Model |
Description |
Price |
|
| 1700 |
1/8" - Two RCA 3ft |
$9.99 |
|
| 1701 |
1/8" - Two RCA 6ft |
$14.99 |
|
Back
to PA System Packages
| |
