MixTrack 2 TS110A DJ System |
|
|
- Numark MixTrack 2 Digital DJ Controller
- 16 backlit rubber drum pads with Loop Mode, Sample Mode, and Hot Cue Mode
- Touch-activated illuminated platters for precise scratching and control
- Complete mixer section with a crossfader, 3-band EQ, and music library navigation controls
- 16 dedicated effects controls to add and manipulate flanger, phaser, echo, and more
- Pitch and Sync controls for seamless and easy mixing
- Virtual DJ LE audio/video/karaoke software included
- Standard MIDI for use with most popular DJ software
- Class-compliant with both Mac and PC; no driver required
- USB-powered; no power adapter required
- Two Alto TS110A Powered DJ Speakers
- ACTIVE 600 WATT 2-WAY 10" LOUDSPEAKER
- 600 Watts Class D power
- 10” low-frequency transducer, 1” neodymium driver
- Two Mic/Line combo inputs with independent volume controls
- XLR output to link speakers
- Lightweight, trapezoidal cabinet with handle
- Stand and pole-mountable or flyable
- Clip Limiter with red LED
- Ground Lift switch
- Contour switch for increased EQ control
- Accurate audience coverage, not just on-axis
- Use as traditional upright loudspeaker or as floor wedge monitor
- Designed and tuned in the USA
- Transducer Low: 10" Woofer with 1.5" voice coil
- Transducer High: Neodymium compression driver, 1” exit with 1” voice coil
- Power Amplification: 600 Watts peak (470 W LF + 130 W HF), 300 Watts continuous (235 W LF + 65 W HF)
- Frequency Range: (-10 dB): 53 Hz - 20 kHz
- Frequency Response: (±3 dB): 70 Hz - 19 kHz
- Maximum SPL @ 1m: 123 dB peak, 120 dB continuous
- -6 dB Nominal Coverage: 80° / 100° x 60° nominal
- Active Crossover: 2.5 kHz
- Connectors: 2 x Mic / Line Female XLR - 1/4” combo inputs, 1 x Loop - Out Male XLR
- Input Control: Line / Mic -∞ to +50 dB, Maximum input level +23 dBu , Input Impedance 15 kOhms
- External Controls: Volume, Power switch with LED indicator, Clip/Limit LED, Ground Lift switch
- Protection Features: Over-excursion, Thermal, Driver
- AC Power: 100 VAC, or 110 – 120 VAC, or 220 - 240 VAC (50 / 60 Hz)
- Enclosure: Trapezoidal, with floor monitor capability. Injection molded, polypropylene enclosure, with perforated steel grille
- Mounting: Integrated pole-socket (36 mm dia.) One Handle, four M10 threaded sockets: 2 top, 2 bottom
- Dimensions (WxLxH): 20.2in x 12.99in x 11.73in
- Weight: 26.6 lb
|
If you don't see it, it doesn't mean we don't have it.
If you are interested in a certain product,
but don't see it on our website, please call us or e-mail us!
*All products subject to available stock.
Copyright © 2014 by www.123DJ.com