Now, with the TS2's, we've significantly eclipsed that level of achievement.
The range is comprised of four models, the TS208, TS210, TS212 and TS215. The amplifiers in all four are rated at 550 watts continuous, 1100 watts peak-a significant increase over the previous line. This new higher power capability ensures greater output for use in larger spaces, with increased clarity, since the amplifiers won't "run out of steam" and distort the way less powerful units will.
The all-new industrial design is more than just beautiful: The TS212 and TS215 have five integrated handles and the TS208 and TS210 have two, making them easy to pick up in either H or V orientation. The TS215 and TS212 have M10 rigging/suspension points and the TS210 and TS208 have M6 rigging/suspension points. The tough, durable cabinets have excellent acoustic properties, while their light weight makes them easy to transport.

Because of their cutting-edge, high-efficiency amplifiers, these speakers run at far lower temperatures than conventional amplifiers, even during extended periods of high output. The ground-up design effort for these speakers enabled us to incorporate advanced amplifiers with superior heat-dissipation characteristics, eliminating the need for costly, noisy cooling fans. The result is a powered speaker system that is cleaner, quieter and more reliable.

Higher performance, unsurpassed utility and flexible I/O options, easy transportability and unparalleled value-you'll find it all in the Alto Professional TS2 Series.

1100-watt 8-Inch 2-way powered loudspeaker

• 550W continuous, 1100W peak Class D power
• Bi-amplified design with precision active crossover and EQ
• 8-inch (203 mm) LF driver, 2-inch (50.8 mm) high-temperature voice coil
• 1-inch (25.4 mm) neodymium HF driver with precision waveguide
• Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs and independent level controls
• Custom engineered high-efficiency class D amplifiers with passive cooling design - No fan means the speaker runs cleaner, quieter and has greater long-term reliability
• XLR Link output
• Ground-Lift switch
• Contour switch for increased EQ control
• Electronic clip, thermal and transducer overdrive protection
• Compact, lightweight, trapezoidal cabinet design for easy transport and installation
• Angled rear panel for wedge monitor applications
• Stand and pole-mountable with integral M6 suspension points
• Designed and tuned in the USA

Tech Information

• Output Power 1100 W peak (700 LF + 400 HF) 550 W continuous RMS (350 LF + 200 HF)
• Low Frequency 8" (203 mm) woofer, 2" (51 mm) voice coil
• High Frequency 1" (25 mm) exit with 1" (25 mm) neodymium compression driver
• Crossover 2.5 kHz Maximum SPL 123 dB peak, 120 dB continuous (dB-SPL @ 1 m)
• Frequency Response 62 Hz - 20 kHz (+ 3 dB)
• Frequency Range 52 Hz - 22 kHz (-10 dB)
• Coverage 90^ο H x 60^ο V
• Connectors (2) 1/4" (6.35 mm) TRS or XLR inputs (1) XLR link output
• Cabinet Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
• Controls Volume, power on/off with LED, clip limiter with LED, ground lift
• Protection Electronic clip, thermal and transducer overdrive protection
• Power AC Input: 100-120/220-240 V, 50/60 Hz Fuse: 100-120 V T6.3AL AC250V / 220-240 V T3.15AL AC250V
• Dimensions (width x depth x height) 10.3" x 9.6" x 17.2" 261 x 244 x 437 mm
• Weight 17.6 lbs. 8.0 kg