| 
|
| Vestax Ultra Pack |
 |
Regular
Price $4199.99
Our Price $3499.99
|
Connect this package to your laptop with ease
For only $49.99! |
|
- Two Vestax PDX3000Mix Turntables
- The new torque simulator system enables DJs to adjust the rotation torque of the motor to their preference. This changes the characteristic of the pitch control, the touch of when slowing down the platter with your finger and when twisting forward with the spindle, especially when mixing.
- Break control to adjust the stopping speed of the platter
- The pitch control fader is slightly heavier than the previous PDX series for fine adjustment and advanced accuracy. The quartz lock button is turned off when the power is turned on.
- Standard +/-10% pitch control and +/-50% pitch control.
- Vestax's original DC direct drive motor obeys accurately to the electric signals sent to the circuit. The platter is screwed down to the spindle to prevent it from slipping toward the rotation direction.
- The MIDI input connection on the PDX-3000mix combine's analog with digital, allowing external MIDI devices to control the rotation speed and sparking DJs with new ideas.
- The motor characteristic of which a scratch DJ and a mix DJ ask for is absolutely different. The most distinctive difference is the required servo characteristic of the motor.
- DJs into scratching and turntablism need to have the motor always at a constant speed rate to keep the rhythm and pitch steady, no matter how hard they spin.
On the other hand, DJs who are into the mix need to be able to finely adjust the pitch by touching the platter. And for all DJs, the motor must have a starting torque which immediately reaches the constant speed rate.
- Vestax has sampled and digitally simulated these various servo characteristics, and as a worlds first feature, has made it adjustable with one little rotary knob. The torque simulator is a new feature which enables DJs to use the PDX-3000mix for any style they wish.
With the 3000, mixing and scratching is easier than any other while being able to scratch like no other turntable with the same PDX motor and features.
- Adjustable tone arm base
The arm base of the PDX 3000mix is constructed with a rubber cushioning to absorb unneeded vibrations which come from the body. This rubber cushioning is also applied to protect the body from feedback.
Ideally, the tone arm height should be adjusted so that it is horizontal to the vinyl. Although, certain DJs (especially turntablists) will set the arm base to a higher position and add more needle pressure so the needle doesn't skip in any condition. The tone arm base of the PDX-3000mix is adjustable to the DJs preference.
- Powerful Motor
The PDX-3000mix's direct drive DC motor has powerful torque and reaches a constant speed rate within 0.5 seconds from pushing the start/stop button. An extremely precise regulator is required to accurately control such a motor, and with the PDX-3000mix it is digitally (32bit CPU) controlled with a digital servo. This servo keeps the motor rotating no matter how heavily the pitch is changed, reverse button is pushed or the platter is pulled back. The platter completely obeys the motors movement by having it screwed down to the spindle of the motor.
- Strong Body Material
The ultra strong foamed ABS plastic that constructs the body is advanced in durability, strong against feed back and is highly resistant to impact.
- Air Suspension Insulators
The insulators (the feet) are filled with rubber for absorbing shock, and have airspace inside for better feedback absorbent.
- Motor
Direct Drive DC Motor
Starting Torque 2.7kg cm
Starting Time 0.5sec (33 1/3 rpm) 70
Wah Flatter 0.07% W.R.M.S.
Torque Digital torque simulator
- Tone Arm
ASTS stright tone arm�iPDX-3000
- Size/ weight
454(W)X162(H)X365(D)mm/9.5kg
- Power
AC100V
- Vestax PMC580 Pro Mixer
-
Intuitive effect operation
-
The PMC-580Profs effects can be operated with 2 different effect switch modes.
-
<MOMENTARY MODE>
Useful for when you want instant effects on short phrases. The effect will be applied to the sound only while the effect button is pushed.
-
<ALTERNATE MODE>
Useful for when you want to apply effects in to a long mix. The effect will be applied to the sound once the effect button is pushed, and will continue to be until the effect button is pushed again.
Some effects apply to the sound differently regarding the selected effect switch mode
-
sound.
-
HI GAIN TRIM control circuit is a new feature designed to bridge the gap between digital media, MP3s and CD source sound levels.
EQ / ISOLATOR select switch
An EQ/ISOLATOR select switch is located on each program channel to enable DJs to select their preference sound adjustment method in regards of the music they play.
-
BEAT KEY
BEAT KEY is a feature which operates simultaneously with the auto BOOM counter and TAP BPM counter.
-
BEAT KEY will control the effects BPM along with the detected BPM of the playing track, selected from: 8, 4, 2, 1, 3/4, 2/3, 1/2, 1/4 and 1/8.
-
BPM controllable effects:
<PGM>LOOP / DELAY / LOW cut DELAY / FLANGER
<MASTER>AUTO HP, BP, LP / FLANGER / PHASER / DELAY/ AUTO PAN / TREMOLO / PANNING DELAY
INPUT/OUTPUT
The two 44.1k, 48kHz sampling rate digital inputs enable digital connection and provide a sound system with no sound deterioration.
-
Digital music files can be played from computers and tracks can be recorded to computers via USB input/output, a standard feature for digital mixers. (The USB circuitry of the PMC-580Pro utilizes the driver device within the operating system of the computer and does not require any specific driver to be installed)
OPERATION
Smooth 60mm input faders for high precision mixing.
-
The reliable Vestax CF-PCV is applied as the cross fader together with fader curve control, suitable for mixing and scratching.
-
The top panel layout is designed considering the DJ to play intuitively without mixing up the effect section and sound control section during club performance.
-
Large effect knobs for dynamic effect control.
-
Input faders and the cross fader can be easily replaced by detaching the section top panel.
OPTION
The DX panel, an option item to increase inputs and outputs can be installed to the front panel for DJs who to wish to use DJ software with the PMC-580Pro.
CLUB DJ FEATURES
-
2 Band EQ, STEREO / MONO select switch and CUE / MASTER select on BOOTH OUT and headphones to support the DJ when theyfre in the mix.
-
The MIC section comes with a 2 Band EQ and TALKOVER switch for advanced mic performance.
-
Club standard XLR connection applied to MASTER // BOOTH OUT.
MIC EFFECTER
<3 convenient mic effects >
PITCH SHIFT
Modulates the mic sound within +/-1 octave and changes the voice to a high/low pitch.
-
DISTORTION
Deteriorates the mic sound and creates a distortion effect.
-
MIC ECHO
Applies an echo effect to the mic sound.
- Two Shure M44-7
- ALL CABLES INCLUDED!
|
Back
to Turntable packages
|
|
