Eliminator Tri Disc 9

Description

This unit can be either an 6 or 8 channel DMX intelligent color wash. The TriDisc9 LED has 4 operating modes; sound active mode, auto program mode, manual mode, or it can be controlled by a DMX controller. The unit can be run as a stand alone unit or in a Master/Slave configuration. This unit has been tested at the factory, there is no assembly required. The unit is ready to be plugged in to a power outlet. There are no dipswitch settings for Master/Slave mode, just simply link the units together. To enhance the beams effects you can use a fog machine. This unit looks good in pair

Features:

• MASTER-SLAVE OPERATION: This function will allow you to link up to 16 units together and operate without a controller. In Master-Slave operation one unit will act as the controlling unit and the others will react to the controlling units programs. Any unit can act as a Master or as a Slave.
• 9 RGB Tri LED's, 3 Watts Each
• 2 DMX Modes, 6 Channel or 8 Channel
• Dimming Effect
• Strobe Effect
• 30° Beam Angle
• Power Linkable
• Fuse: 2 amp
• Voltage: AC 120v/240v 50Hz/60Hz
• Power Consumption: 29W
• PDF Manual