CURRENTLY OUT OF STOCK

Laserworld EL-200RGB 200mW RGB Laser Effect

The Laserworld EL-200RGB is a RGB laser system with a total output power of up to 200mW.

The red diode laser module with a wavelength of 650nm, the green DPSS laser module with a wavelength of 532nm and the blue laser module with a wavelenght of 445nm ensure beautiful colors and brightness. The beams have a diameter of about 3mm and a beam divergence of about 2mrad and the projector offers high-speed stepper motors with 2-5kpps as well as a scan angle of up to 30°. About 50 preset basic patterns, like layers, tunnels, fences, waves etc. can be controlled via DMX. A sound-to-light mode as well as a stand-alone mode are available too. For the sound-to-light mode the sensitivity of the integrated adjustable microphone can be adjusted. There is an on-off switch at the rear side of this device.The triple laser apertureprovides extra intense red, green and blue beam effects.

The Laserworld EL-200RGB is a good solution for first-time users and mobile use and it is often used in bars, small clubs, at private parties or for home use.

FDA laser variance application kit included In box with laser. Completion of Laser Variance Application Required Prior to Operating Laser.

Specifications:

• Total Power typical: 200mW
• Minimum output power: 145mW
• Power Red: 60mW / 650nm
• Power Green: 25mW / 532nm
• Power Blue: 60mW / 445nm
• Beam Specifications: ca. 3mm / 2mrad
• Laser Sources: Diode, DPSS Laser
• Laser Class: 3b
• Operation Modes: Stand-Alone, Sound-to-Light, DMX
• Scanner: high-speed stepper motors, up to 2-5kpps
• Scan Angle max.: 30°
• Basic Patterns: ca. 50 (layers, tunnels, fences, waves, etc.)
• Accessories: power cable, manual, key, Safety Unit
• Power Supply: 110V - 220V AC 50/60Hz
• Power Consumption: 60 W
• Dimensions: 6.9/15.6/3.4 in
• Weight: 8.6 lbs