PRO AUDIO




Behringer FBQ2496

Behringer FBQ2496

Regular Price $499.99

Our Price $249.99

WARRANTY SPECIAL
TWO YEAR FULL WARRANTY. ONLY $9 A YEAR FOR FULL PEACE OF MIND. ENJOY YOUR EQUIPMENT WITHOUT WORRY. PLAY WITH IT AND IF ANYTHING IS WRONG, IT WILL BE FIXED. Details

Regular Price $99.99

Full Protection Only $17.99

Regular Price $499.99

Our Price $249.99
WARRANTY SPECIAL
TWO YEAR FULL WARRANTY. ONLY $9 A YEAR FOR FULL PEACE OF MIND. ENJOY YOUR EQUIPMENT WITHOUT WORRY. PLAY WITH IT AND IF ANYTHING IS WRONG, IT WILL BE FIXED. Details

Regular Price $99.99

Full Protection Only $17.99

We'll beat any price!

Behringer FBQ2496

Description

The FBQ2496 is the fastest (>0.2 sec.) and the only 96kHz feedback suppressor on the market. Using an ultra-fast feedback detection algorithm, it automatically and 'intelligently' locates up to 20 feedback frequencies per channel and sets extremely narrow notch filters to 'destroy' them, leaving the remainder of the signal virtually untouched. Easy does it: with the 'Set-and-Forget' default setting plus the Panic button, your Feedback Destroyer can be up and running in no time! The auto mode continuously monitors the mix, resetting programmed filters automatically, while the manual mode allows individual setting of up to 40 fully parametric filters with frequency, bandwidth and gain adjustment. Open MIDI architecture means that future software updates and flexible communication with digital equipment are a no-brainer. With its various modes you can master just about any live sound situation or use it as a creative sound-shaping tool.

Features:

  • Automatically and 'intelligently' locates and destroys up to 20 frequencies per channel
  • Ultra-fast feedback detection (>0.2 sec) due to proprietary FFT signal analysis
  • Ultra-narrow notch-filters (up to 1/60th octave) for very effective feedback suppression, while keeping highest sonic quality
  • 'Set-and-forget' default setting plus Panic button enable immediate and super-easy Feedback Destroyer performance
  • Auto mode continuously monitors the mix, resetting programmed filters automatically
  • Single-shot mode automatically detects and destroys feedback and locks the filter until you reset it manually
  • Manual mode allows individual setting of up to 40 fully parametric filters with frequency, bandwidth and gain adjustment
  • Ultra-high resolution 24-bit/96 kHz A/D and D/A converter powered by a 32-bit DSP for ultimate audio performance
  • Open MIDI architecture for future software updates and flexible communication with digital equipment
  • Balanced inputs and servo-balanced outputs with gold-plated XLR and 1/4' TRS connectors
  • Internal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus lowest possible power consumption for energy savings
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by Behringer Germany

    Audio Inputs


    Connections: XLR and 1/4 in. TRS stereo connector
    Type: Electronically balanced input
    Input impedance: approx. 20 kOhms balanced
    Nominal Input Level: -10 dbV/ +4 dBu (adjustable)
    Max. Input Signal Level: +20 dBu at +4 dBu nominal level, +6 dbV at -10 dBV nominal level, typically -40 dB

    Audio Outputs

    Connections: XLR and 1/4 in. TRS stereo connector
    Type: Balanced
    Output Impedance: approx. 200 Ohms balanced
    Max. Output Level: +20 dBu at +4 dBu nominal level, +6 dBV at -10dBV nominal level

    Bypass

    Type: Relay, hard bypass in case of power outage

    System information

    Frequency Response: <10 Hz to 44 kHz
    Dynamic Range: 107 dB
    THD: 0.007 % typically at +4 dBu, 1 kHz, amplification 1
    Crosstalk: <-100 dB @ 1 kHz

    MIDI Interface

    Type: 5-pole DIN connectors IN/OUT/THRU

    Digital Processing

    Converter: 24 Bit / 96 kHz
    Sample Rate: 96 kHz

    Parametric Equalizer (PEQ)

    Type: Max. 20 independent, fully parametric filters per channel
    Frequency Range: 20 Hz to 20 kHz
    Bandwidth: 1/60th to 10 octaves
    Possible Value Range: +15 to -36 dB

    Feedback Destroyer (FBQ)

    Type: Digital signal analysis for feedback recognition purposes
    Filter: Max. 20 digital notch filters per channel
    Frequency Range: 20 Hz to 20 kHz
    Bandwidth: 1/60th octave
    Possible Value Range: 0 to -36 dB

    Display

    Type: 3-digit numeric LED display

    Power Supply

    Mains Voltage: ~100 - 240 V, 50 - 60 Hz
    Power Consumption: Approx. 10 W
    Fuse: T 1 A H 250 V
    Mains Connector: Standard receptacle

    Dimensions/Weight

    Dimensions (H x W x D): Approx. 1 3/4 in. x 19 in. x 7 1/2 in.
    Weight: Approx. 4.2 lbs.
2201 S. Union • Chicago, IL 60616 Phone: 312-846-6192 • Fax: 312-492-8949 Toll Free 1-800-856-8397
Send me manufacturer coupons and free promotions
Email:

CONTACT US - BEAT A PRICE - GEAR RENTAL - TRACK YOUR PACKAGE - RETURNS / WARRANTY INFO ABOUT US - SHIPPING INFO - PURCHASE ORDERS - CUSTOM INSTALLATION - TERMS

DJ LIGHTS

If you don't see it, it doesn't mean we don't have it. If you are interested in a certain product, but don't see it on our website, please call us or e-mail us!

*All products subject to available stock.

Copyright © 2016 by www.123DJ.com