MT- 600 power amplifier

Regular Price $1133.99 Our Price $729.99

Amplifier Accessories: Accepts MT-XLR and MT-BB input modules. Signal-to-Noise:(A-weighted) Better than 105 dB below full rated power into 8 ohms with 26 dB gain. (Unweighted) Better than 100 dB below full rated power. Input Impedance: Nominally 20 K ohms balanced and 10 K ohms unbalanced. Controls: Enable, channel 1 and 2 level controls, stereo/mono switch (Stereo, Bridge-Mono, Parallel-Mono), ground lift switch, three-position input sensitivity switch (0.775 V or 1.4 V for full output or a 26 dB voltage gain). Connectors: Inputs: Balanced 1/4-in. phone jack for each channel. Output: A pair of color-coded binding posts for each channel. Dimensions: 19 in. (48.3 cm) standard rack mount width, 3.5 in. (8.9 cm) height, 16 in. (40.6 cm) depth behind mounting surface. Total Harmonic Distortion (THD): Less than 0.05% at full rated power from 20 Hz to 1 kHz increasing linearly to 0.1% at 20 kHz. Intermodulation Distortion (IMD): (60 Hz and 7 kHz 4:1) Less than 0.05% from less than 164 milliwatts to full rated power. Load Impedance: Rated for 2 to 8 ohms in Stereo, 4 to 16 ohms in Bridge-Mono, 1 to 4 ohms in Parallel-Mono. Safe with all types of loads. Output Power per Channel in Stereo Mode with Both Channels Driven: FTC Continuous Average Power from 20 Hz to 20 kHz with No More than 0.1% THD: 210 watts into 8 ohms, 285 watts into 4 ohms. Maximum Average Power at 1 kHz with No More than 0.1% THD: 220 watts into 8 ohms, 325 watts into 4 ohms, 400 watts into 2 ohms. Output Power in Bridge-Mono Mode: Maximum Average Power at 1 kHz with No More than 0.1% THD: 750 watts into 4 ohms.